環境工程英文簡歷模板
簡歷，顧名思義，就是對個人學歷、經歷、特長、愛好及其它有關情況所作的簡明扼要的書面介紹。簡歷是有針對性的'自我介紹的一種規范化、邏輯化的書面表達。對應聘者來說，簡歷是求職的“敲門磚“。下面簡歷模板小編為大家準備了一份環境工程英文簡歷模板。希望助你求職成功!
|
Name: |
Mr. YJBYS |
Nationality: |
China (Mainland) |
no photo |
|
Current Place: |
Zhuhai |
Height/Weight: |
175 cm 58 kg |
|
Marital Status: |
Single |
Age: |
27 years |
|
Application type: |
Jobseeker |
|
Preferred job title: |
Complaints Specialist: customer quality related 、 Quality Management/Testing Manager((QA/QC Manager): quality management related 、 Accreditation Engineer/Auditor: system maintain related |
|
Working life: |
4 |
Title: |
No title |
|
Job type: |
Full time |
Expected Start date: |
In a month |
|
Expected salary: |
￥5,000--￥8,000 |
Preferred working place: |
Guangzhou Zhuhai Foshan |
|
Company's name: |
FlextronicsBegin and end date: 2008-03-2012-04 |
|
Enterprise nature: |
Soly foreign funded enterprisesIndustry: Communication/Telecom/Network Equipment |
|
Job Title: |
customer quality engineer |
|
Job description: |
Full time working as customer service engineer, mainly responsible as
A. Handling the internal and oversea customer compalint, solve the problem and make sure our product and service are consistent to meet customer's requirement;
B. Highlight customer quality issue into related manufacture process to alert the production and building a good self-awareness for the operators; Fail mode analysis for the returned product, discuss the corrective and preventive action for the root cause, thus to keep a continual quality improvement;
C. Handling the quality survey & safe-environment survey from customer to meet customer satisfication; participate in the internal & customer & third party audit, formulate the related corrective & preventive action for the non-conformity items, and follow up to verify the effectiveness for the action;
D. Daily transaction process for the customer service department. |
|
Reasons for leaving: |
company internal adjustment |
|
|
|
Company's name: |
pulse(ZHUHAI) LTDBegin and end date: 2007-05-2008-03 |
|
Enterprise nature: |
Soly foreign funded enterprisesIndustry: Communication/Telecom/Network Equipment |
|
Job Title: |
Quality engineer |
|
Job description: |
1. Responsible for process quality control of universal Non-Cisco part and Molding 2Hi parts. Handle the process quality issue and implement the corrective action. Assurance the process quality is under controlled and to satisfy the customer.
2. Do the FPA audit failure analysis and find out the root cause of the nonconformity then determine the corrective action to solve the issue.
3. EPS management. Arrange the product to do the EPS aim to verify the whether the product can satisfy our requirement or not and to find out the defect in advance. This is also to assurance the product quality.
4.To establish and maintain related quality document to support and maintain the quality system;Implement and follow up customer complaint corrective action;Manage IPQC and arrange the inspectors daily line audit and deal with the daily line audit findings. |
|
Reasons for leaving: |
personal development |
|
|
|
Company's name: |
hazebattery LTD.Begin and end date: 2005-03-2007-04 |
|
Enterprise nature: |
Soly foreign funded enterprisesIndustry: Mechanics/Electrical Equipment/Heavy Industry |
|
Job Title: |
Quality engineer |
|
Job description: |
1.Responsible for solving the customer complaint. To be specific, is to analysis the main problem of the case; to judge whether there is our company’s fault or not; if it is our fault I should go through the case and find out what, when, where, how the problem occur, and who is responsible for the problem; take temporary action to compensate the loss and the permanently corrective action to improve the manufacture process; send a general report to customer and trace the action effect and close the case.
2.Control the manufacture process quality and solve the quality problem and find the latent problem then take action to prevent it occur again. Aim to assure the product with a good quality through the whole line and to improve it step by step day by day. Control the income quality and manage the supplier to make sure that the used material all under control. Standardization the good corrective actions and update the documents. |
|
Reasons for leaving: |
personal development |
|
【環境工程英文簡歷模板】相關文章：
環境工程師崗位英文簡歷模板09-04
環境工程師英文簡歷模板范文11-17
環境工程英文簡歷范文11-09
關于環境工程師的英文簡歷模板10-05
環境工程簡歷封面模板10-04
環境工程畢業設計模板01-21
環境工程畢業電子簡歷模板11-03
環境工程行業工作簡歷模板09-06
CV英文簡歷模板英文簡歷模板08-15
環境工程與管理電子簡歷模板11-02